来源：http://www.thisperthlife.com 日期：2020-08-11 发布人：admin
1. When cleaning the machine, only wipe the electric box, not wash it.
2. Adjust the main shaft seal ring, remove the pump core and feed bracket, and then tighten the three screws. Standard after screw tightening: 8-inch can easily pull spindle screw by hand.
3. When moving the machine on the construction site, it is necessary to unplug the power line regardless of the interval.
4. When the machine is working, it is necessary to close and lock the electric box door to avoid dust and moisture invasion and damage to machine parts.
5. Before and after operation, it is necessary to oil the bearing box and check the gearbox oil frequently.
6. When cleaning the pump core, it is necessary to add a small amount of silicone oil for smoothness and anti embroidery. The purpose is to protect the rotating core from rusting and to start smoothly after the next operation.
Since the full hydraulic technology is selected for the self feeding mixer, it is necessary to consider whether all the hydraulic technology is advanced or not, and the visual quality of the hydraulic system. Because the power comes from the engine, in addition to considering the function and quality of the engine, it is also necessary to consider the function, bearing capacity and quality of the chassis. In the process of maintenance of vehicle equipment, it is necessary to strictly follow the correct operation process to adhere to the role.
Method of cleaning internal concrete by self loading mixer
In our days, self loading mixer is a special vehicle for transporting concrete. A large water tank is usually installed behind the vehicle to mix concrete. However, since we need to clean the concrete inside the vehicle during long-term use, we will introduce the specific cleaning methods below.
1. Prepare the emergency drive hose, close the active concrete mixer, and then remove the high-pressure oil pipe joint on the hydraulic motor.
2. Remove the high-pressure oil pipe and connect it with the emergency drive hose of the corresponding connector on the defective vehicle.
3. The control handle of the engine mixer is set at the unloading position to remove the concrete in the truck
4. After the emergency drive is completed, remove the drive hose and restore the original state of the vehicle.
Thank you for reading. This article is from Zhongke Jufeng mixer. For more information and questions, please click: http://www.thisperthlife.com We will continue to work hard to provide services for you, thank you for your support!